What are the steps for installation and use of thermal conductive silicone film?

What are the steps of installing and using thermal conductive silicone film? I don't know if you know it or not. It doesn't matter. Now Xiaobian shares it with you.

The steps for installation and use of thermal conductive silicone film are as follows:

1. Keep the end surface of the thermal conductive silicone film clean, prevent the dirty adhesion of the thermal conductive silicone film, and the self-adhesive and sealing thermal conductivity of the dirty thermal conductive silicone film will become worse.

2. When taking away the thermal conductive silicone film, the large thermal conductive silicone film should be grabbed from the central part, and the smaller one should not be required. Because the large thermal conductive silicone film is not uniformly loaded, it will cause deformation, affect the subsequent operation, and even damage the silicone film.

3. Take the sheet in your left hand and tear off one side of the protective film in your right hand. It can not tear off both sides of the protective film at the same time, reduce the number and area of direct contact with thermal conductive silicone film, and keep the self-adhesive and thermal conductivity of thermal conductive silicone film from being damaged.

4. Tear off one side of the protective film and face to the radiator. Align the thermal conductive silicone film to the radiator. Slowly put down the thermal conductive silicone film. Be careful not to create bubbles.

5. If bubbles occur in the operation, one end of the silicone film can be pulled up to repeat the steps mentioned above, or the bubbles can be gently erased by means of tools. The strength is not too large to avoid damage to the thermal conductive silicone film.

6. Tear off the protective film on the other side, put it into the radiator, tear off the last protective film with less force to avoid pulling or pulling up the thermal conductive silicone film.

7. After tightening or using strong viscous thermal conductive silicone film, exert certain pressure on the radiator and store it for a period of time to ensure that the thermal conductive silicone film is fixed properly.

Thermal conductive silicone film has very good heat dissipation effect. In the process of installation of thermal conductive silicone film, Lifan's silicone products suggest that caution should be taken not to be too impetuous to achieve excessive results, resulting in bubbles and damage to thermal conductive silicone film, resulting in a waste of money and time.